IGBC AP Exam Model Question Paper -2

 IGBC AP Exam Model Question Paper -2

 

 

Question 1:

 

What is IGBC’s annual flagship event ?

 

1. Green Building Congress
2. Green Building forum
3. Green Building Conference

 

Question 2:

 

ECBC is Applicable for ?

 

1. 1000Sq.m and More
2. Connected load of 100KW
3. Both A & B

 

Question 3:

 

NBC Part 9 deals with ?

 

     A) Plumbing Service

     B) Building Material

     C) Building Service

 

Question 4:

 

MERV Related to ?

 

1. Ventilation
2. Light Pollution
3. Rain Water Harvesting

 

Question 5:

 

Hazardous waste management guidelines is provided by ?

 

A) ECBC

B) NBC

C) CPCB

 

Question 6:

 

Which standard is used for basic facilities for construction workers?

 

1. BOCW
2. ECBC
3. ASHRAE

 

Question 7:

 

NBC Parking Area Guidelines are based on ?

 

1. Building Area
2. Location
3. No of Occupants & function

 

Question 8:

 

Which of the following is not rapidly renewable material ?

 

1. Sunflowers
2. Bamboo
3. Sawdust

 

Question 9:

 

What is the pressure to be maintained in the smoking room ?

 

1. -5Pa
2. +5Pa
3. 10+Pa

 

Question 10:

 

Which of the following is the least detrimental to the ozone layer ?

 

A) CFC

B) HCFC

C) HFC

 

IGBC AP Exam Model Question Papaer -1

 IGBC AP Exam Model Question Paper – 1

 

 

Question 1:

 

If a project is achieving 65 credits and missing one mandatory requirement , can it still apply for certification?

 

1. Yes, after paying some fees
2. Yes, if applying for the first time
3. No

 

Question 2:

 

Which of below topic is covered in ASHRAE 90.1?

 

A) Water

B) Energy

C) Green Building

 

Question 3:

 

Statement A: Use of turf on the site should be minimized to conserve water.

Statement B: Treated wastewater can be reused for landscaping, flushing and cooling tower make-up water

1. A is True, B is False          
2.  A is False, B is True

      C)   Both are True                   

      

 

Question 4:

 

Which of the following is the objective of exterior light pollution reduction?

 

1. Reduce impact on nocturnal environment
2. Reduce lighting energy consumption
3. To turn off non-emergency lighting

 

Question 5:

 

Which of the following is the most efficient irrigation system?

1. Drip irrigation
2. Sprinkler
3. Crown flood

 

 

Question 6:

 

The strategy of using high solar reflective index to cover exposed roof area is used for what purpose?

 

1. Outdoor Light Pollution Reduction
2. To minimise heat island effect
3. Minimising negative impact on the ozone layer

 

Question 7:

 

How many CIRs are answered without levying any fee?

1. 2
2. 4
3. 1

 

 

Question 8:

 

The Precertification is valid for how long from the date of award?

 

1. 2 years
2. 5 Years
3. 3 Years

 

 

Question 9:

 

Which credit and how many points are awarded to a project with IGBC AP as a principal design team member?

 

1. Innovation, Three point
2. Innovation, Two point
3. Innovation, One point

 

 

Question 10:

 

How long does IGBC take to perform preliminary review?

 

1. 20 working days
2. 30 working days
3. 15 working days

UPS Design Configuration

There are many types of UPS design configuration available in today market. They are,

1. Capacity UPS Configuration 

2. Isolated redundant UPS Configuration 

3. Parallel redundant UPS configuration 

4. Distributed redundant UPS configuration 

5. System plus system UPS configuration 

To know about more details, please follow up in youtube and subscribe it today without fail.

For Tamil & Hindi :

Engineers View 

For English :

Mep Engineers 

Thanks.

Ashokraj S

Calculation of Chiller Volume Flow Rate

Calculation of chiller volume rate : 

Since the water is standard fluid, mass flow rate of water and volume flow rate are both equal. 

Hence we can use the below formula to find out the mass/volume flow rate of water.

Q =m ×Cp ×Delta T 

Where

Q is chiller coil load in KW 

m is  Mass flow rate of water 

Cp  is Specific heat of water 

Delta T is difference between chiller entering water temperature and leaving water temperature.

Thanks for visiting our blogger. 

For more information, please link the below link and see our videos 

https://youtu.be/rN4a0rqlXyg

Battery Charging Current Calculation

How to calculate battery Charging Current ?

Battery Charging Current should be 10% of its battery AH rating .

Example 2: 

If you have 200AH SMF lead acid battery, then what will be the Charging Current ? 

10 % of Battery AH rating

10% of 200AH 

= 200×10/100

= 20 A.

The charging Current of 200AH battery should be 20A as per the thumb rule.

Example 1: 

If you have 100AH SMF lead acid battery, then what will be the Charging Current ? 

10 % of Battery AH rating

10% of 100AH 

= 100×10/100

= 10 A.

The charging Current of 100AH battery should be 10A as per the thumb rule.

Thanks for reading this. 

Requesting you to follow me on blogger and YouTube. 

Ashokraj S 

YouTube Link :

https://youtu.be/w_CzSOk7ilY

Harmonic Allowable limit as per CEA Guidelines

As per the CEA Guidelines, those who  maintaining the Substation in the voltage level of 11KV,22KV,33KV, they should maintain the total Harmonic distortion as per the below allowable limit.

Individual Voltage Harmonic Distortion :

Maximum acceptable limit is 3% 

Total Voltage Harmonic Distortion :

Maximum acceptable limit is 5% 

Total Current Harmonic Distortion :

Maximum acceptable limit is 8% 

This limit has mentioned by institute of electrical and electronic engineer (IEEE 519 2014)

If THD is breaching the acceptable limit, then you have to install harmonic filter to maintain the level as stated by above standards, otherwise government authority will impose the penalty.

The Harmonic filter may be active harmonic filter or passive harmoic filter or hybrid harmoic filter.However, the selection of filter is based on your site load requirement. 

If you want to know about Harmonics and its type and its control method, then please follow me at blogger and also subscribe our YouTube channel without fail.

Thanks for reading this small information!...

Stay Home, Stay Safe.

Ashokraj  S

How to calculate efficiency of air cooled chiller ?

Chiller efficiency is generally expressed interms  of iKW/TR. 

Where,

i stands for indicated 

KW stands for kilo watt 

TR stands for ton of refrigeration 

iKW/TR is nothing but the ratio of electrical power input to the compressors to ton of cooling produced by the equipment.

Less value of iKW/TR indicates high efficiency of chiller

Higher value of iKW/TR indicates low efficiency of chiller.

The chiller performance test is usually carried out once in year by the chiller OEM

During the performance test, OEM will bring power quality analyser and ultrasonic clamp on flow meter to the site .

Ultrasonic clamp on flow meter will be installed at return chilled water pipeline of chiller.This flow meter will sense the flow rate of fuild flowing through the chiller. The flow rate can be expressed in gpm or m3/hr.

The power quality analyser will be installed at input power supply consumed by chiller/compressor. 

To calculate the TR of chiller, we have to use the below formula 

TR =(gpm x delta T)/24

Where 

Gpm is gallon per minute 

Delta T is temperature difference between entering and leaving chilled water temperature 

Once you find out the TR of chiller by using the above formula,then you can find out iKW/TR. 

For example:

Kw of chiller at 100% load is 2

Ton of refrigeration of chiller is 2

Formula to find out chiller efficiency is 

iKW/TR =2/2=1 

Thanks for reading this topics.

If you have any doubt on this,please write your queries in the comment box and also you can write your comment in our YouTube channel.

Ashokraj S